Daily maintenance of Shenzhen Jingdiao CNC machine tools

Scope of milling machine maintenance operation
1. Cleaning of the bed and its components, cleaning of iron filings and sanitation of the surrounding environment< Br/>
2. Check each oil level, not lower than the oil mark, and add lubricating oil to each part; XK754A; Horizontal CNC bed milling machine

3. Cleaners, clamps, measuring tools< Br/>
Scope of milling machine's first maintenance operation
1. Clean and adjust the workbench, screw handle, and column inlay< Br/>
2. Check and adjust the clutch< Br/>
3. Clean the three-way guide rail and felt, and clean the inside and outside of the motor, machine tool, and accessories< Br/>
4. Check the oil circuit and add lubricating oil to all parts< Br/>
5. Tighten all screws< Br/>
Milling machine maintenance operation scope

1. Cleaning of the bed and its components, cleaning of iron filings and surrounding environmental hygiene, cleaners, clamps, and measuring tools< Br/>
2. Check each oil level, not lower than the oil mark, and add lubricating oil to each part< Br/>
Scope of weekend maintenance work for milling machines

1、 Cleaning
1. Disassemble and clean all oil felt pads< Br/>
2. Wipe each sliding surface and guide rail surface, wipe the workbench and horizontal, lifting screw, wipe the tool transmission mechanism and tool holder< Br/>
3. Wipe off all dead corners< Br/>
2、 Lubrication
1. Clean and unobstructed oil holes and add lubricating oil< Br/>
2. Add lubricating oil to each guide rail surface, sliding surface, and screw< Br/>
3. Check the fuel tank body and oil level of the transmission mechanism, and add oil to the elevation position< Br/>
3、 Tighten

1. Check and tighten the pressure plate and inlay screw< Br/>
2. Check and tighten the fixing screws of the slider, the tool transmission mechanism, the handwheel, the workbench bracket screws, and the fork top screw< Br/>
3. Check and tighten other loose screws< Br/>
4、 Adjust

1. Check and adjust the belt, pressure plate, and inlay strip for appropriate tightness< Br/>
2. Check and adjust the slider and screw assembly< Br/>
5、 Anti corrosion

1. Remove rust from all parts, protect the painted surface from collision< Br/>
2. Stop using, spare equipment guide rail surfaces, sliding screw handwheels, and other exposed areas that are prone to rusting should be coated with oil for corrosion prevention< Br/>
&Nbsp;